Important Notice

Disclaimer

Link Labs, Inc. (hereafter referred to as ”Link Labs”), reserves the right to make corrections, enhancements, improvements and other changes to its products and services. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products (also referred to herein as ”components”) are sold subject to Link Labs terms and conditions of sale supplied at the time of order acknowledgment.

Link Labs warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in Link Labs’ terms and conditions of sale. Testing and other quality control techniques are used to the extent Link Labs deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed.

Link Labs assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using Link Labs components. To minimize the risks associated with Buyers products and applications, Buyers should provide adequate design and operating safeguards.

Link Labs does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which Link Labs components or services are used. Information published by Link Labs regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Link Labs under the patents or other intellectual property of Link Labs.

Reproduction of significant portions of Link Labs information in Buyers’ data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Link Labs is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of Link Labs components or services with statements different from or beyond the parameters stated by Link Labs for that component or service voids all express and any implied warranties for the associated Link Labs component or service and is an unfair and deceptive business practice. Link Labs is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety- related requirements concerning its products, and any use of Link Labs components in its applications, notwithstanding any applications-related information or support that may be provided by Link Labs. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify Link Labs and its representatives against any damages arising out of the use of any Link Labs components in safety-critical applications.

In some cases, Link Labs components may be promoted specifically to facilitate safety-related applications. With such components, Link Labs’ goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms.

No Link Labs components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use.

Only those Link Labs components which Link Labs has specifically designated as military grade are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of Link Labs components which have not been so designated is solely at the Buyer’s risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.

0 Comments

Add your comment

E-Mail me when someone replies to this comment